国产三级不卡在线电影gnmav_日韩乱偷中文字幕_在线免费看成人大片_日韩美中文字幕一二三区_惠民福利亚洲欧美日韩国产一区二区_在线免费观看国产黄色_少妇内射自拍视频在线观看_91精品久久久国产_成人免费看一级片_草莓视频免费下载直播app

When incorporated into concrete, MCI-2005® forms a protective, monomolecular layer on embedded metals that inhibits corrosion. In new construction, this is quantified by an increase in critical chloride threshold and subsequent reduction in corrosion rates when corrosion does initiate. When used with repair mortars and grouts, MCI®-2005 not only protects rebar within the patch, it is able to migrate into undisturbed concrete adjacent to the repair, to protect reinforcement already in place.

MCI®-2005 has been awarded the USA BioPr efer r ed? designation (www.biopreferred. gov).

PACKAGING & STORAGE
Available in 5 gallon (19 Liter)
pails, 55 gallon (208 Liter) drums,
and 275 gallon (1040 Liter) totes.

Store away from direct sunlight and at ambient temperatures – above 32?F (0?C) and up to 131?F (55?C). When properly stored, MCI®-2005 has a shelf life of 24 months.

HOW IT WORKS
MCI®-2005 is an organic corrosion inhibitor. It is considered ambiodic (mixed), meaning it protects both anodic and cathodic areas within a corrosion cell. MCI®- 2005 contains a blend of amine salts of carboxylic acids which form a protective layer on embedded reinforcement delaying the onset of corrosion as well as reducing existing corrosion rates.
MCI®-2005 is effective at enhancing the durability and extending the service life of concrete structures exposed to corrosive environments (carbonation, chlorides, and atmospheric attack).
WHERE TO USE
?Reinforced concrete including precast, pre-stressed, and post-tensioned structures
?Corrosive environments including exposure to deicing salts, saline groundwater, airborne chlorides, and carbonation
?Marine and coastal structures, highways and bridges, parking decks, balconies, pools, concrete tanks, pilings, substructures, piers, pillars, pipes, and utility poles

ADVANTAGES
?Biobased (67%), awarded USA BioPreferred? designation (www.biopreferred.gov)
?Earns credit towards LEED certification
?Lower toxicity and environmental impact than traditional corrosion inhibiting admixtures such as calcium nitrite
?Low dosage rate with minimal effect on concrete properties (i.e. workability, strength development, air entrainment, etc.)
?Single dosage rate which is independent of expected exposure to chlorides
?Ability to migrate through porous substrates (concrete, masonry, limestone, etc.) by capillary action, vapor diffusion and ionic attraction
?Meets all requirements of ASTM C1582
?Certified to meet ANSI/NSF Standard 61 for use on structures holding potable water
?Field and lab tested worldwide
Complies with CSA S413, Section C1.2, for corrosion inhibiting

PHYSICAL PROPERTIES

DOSAGE

Add MCI®-2005 to concrete mix or repair mortars at 1 pt/yd3 (0.6 L/m3). Dosage is fixed and independent of chloride levels.

APPLICATION

MCI®-2005 is best added with the mix water into ready mix concrete at the plant. Alternatively, it can be dosed into the ready mix truck using portable dosing equipment. Concrete should be mixed thoroughly before placement.

STANDARD TEST RESULTS

ASTM G109 RESULTS

ASTM G109 - Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

MCI®-2005 doubles the time to the onset of corrosion and reduces corrosion currents by 80% compared to untreated samples.

CONSIDERATIONS

The use of MCI®-2005 can cause a delay of initial setting time. The extent of this delay is dependent on the mix design, temperature and humidity. The combination of MCI®-2005 with certain superplasticizers can also increase the set delay experienced. Concrete properties are always best determined in a trial using the actual mix components. Cortec recommends a trial batch anytime you are using MCI®-2005 with new mix components.
Consult with Cortec’s Technic