国产三级不卡在线电影gnmav_日韩乱偷中文字幕_在线免费看成人大片_日韩美中文字幕一二三区_惠民福利亚洲欧美日韩国产一区二区_在线免费观看国产黄色_少妇内射自拍视频在线观看_91精品久久久国产_成人免费看一级片_草莓视频免费下载直播app

The complex mixture of non-toxic, organic inhibitors offers protection that competes with most paints and zinc-rich primers. Provides multi-metal protection. Can be matched to most custom colors.

PACKAGING & STORAGE
VpCI®-396 is available in 5 gallon (19 liter) pails. Partially used containers must be purged with nitrogen.
Product shelf life is 1 year.

CHARACTERISTICS/TECHNICAL DATA

Volume Solids	56.20%
Gloss (ASTM D532)	30-50
VOCs (ASTM D3960)	3.1 lbs/gal (371 g/l)
Viscosity	55-65 sec+ Zahn#3
Pencil Hardness (ASTM D3363)	2H
Spreading Rate	901 sq.ft/gal @ 1.0 mils DFT (22.1 sq.m/l @ 25 μm)
Weight per Gallon	9.39 lbs/gal (1.13 kg/l)
Flash Point	77°F (25°C)
Recommended DFT	2.0-3.0 mils (50-75 μm)
Recommended WFT	3.5-5.3 mils (88-130 μm)
Dry to Touch	2-3 hrs
Dry to Handle	4-6 hrs
Recoat Time	Dry to touch - 72 hrs, sand thereafter
Force Dry	15-20 min @ 150°F (65°C)
Full Cure	3-7 days
Salt Spray (ASTM B117)	750 hrs
Humidity (ASTM D1748)	1000 hrs
Adhesion (ASTM D3359)	5B
Flexibility (ASTM D522)	1/2" mandrel (1.27cm)

APPLICATION
Surface Preparation
Substrate should be free of grease, oil, dirt, fingerprints, drawing compounds, rust inhibitors, or any other surface contam- ination that could affect adhesion. For production line applications, use VpCI-440 or similar phosphatizing pre-treatment. For structural steel applications, Cortec® recommends a minimum of a NACE #3/ SSPC-SP6 commercial blast clean. Consult Cortec® Technical Service and/or test system adhesion prior to full scale application.

A wash primer such as VpCI-373 green applied at 0.5-1.0 mils (12.5-25 microns) is recommended before applying the VpCI®- 396 to aluminum, galvanized or plated substrates. When solvent based topcoats are applied over VpCI-396, compatibility must be checked. Cortec® recommended topcoats include VpCI®-280, 380, 381, 386, 387, 390, 392, 382, and 384.

Note: Make sure dew point is more than 5°F (2°C) less than air temperature for application. Humidity must be min. 20%, max. 80%. Power agitate to a uniform consistency using a “squirrel cage” type mixer, hand-held drill mixer, or other equivalent method. VpCI®-396 can be applied by spray, roll, brush, or dip

Typical Equipment Setups

HVLP / Conventional Spray
?Tip .009”-.021” *dependent upon pressures and viscosity
?Air Pressure 45-55 psi
?Fluid Pressure 10 psi
?Fluid hose should be 3/8” (0.95 cm) I.D. with a maximum length of 50 feet (15.2 m). Pot should always have dual regula- tion and be kept at same elevation as spray gun.

Air Assisted Airless / Airless
?Tip .015”-.035” *dependent upon pressures and viscosity
?Pressure 1800-2500 psi
?Hose should be 3/8” (0.95 cm) I.D. minimum, but a ?”
?(0.64 cm) I.D. whip end section may be used for ease of application. A maximum length of 100 feet (30.5 m) is suggested.
Cleanup

Clean tools/equipment immediately after use with Butyl Acetate when paint is still wet. When dry, use Butyl Cellusolve or MEK. Follow mfg’s safety recommendations when using any solvent.