Qingdao Kede Shengdi
The General Agent in China authorized by CORTEC
135-0535-2885
Service Hotline
VpCI-369 Open Atmosphere Removable Coating
市 場 價：￥0
優 惠 價：￥1
庫 存：0
PRODUCT DESCRIPTION：
VpCI®-369 is an oil-based temporary coating that provides extreme corrosion protection in aggressive environments and is one of our most-popular wet film corrosion inhibitors and lubricants. Can be matched to some custom colors.
E-Mail：zzgvci@163.com
商品詳細
Commercial equivalent to MIL
– PRF – 16173E (Grades 2), NSN 8030-00-244-1295, 244-1297,
244-1298, 01-149-1731. UFI: 1KTX-A14E-NU18-EAEC PACKAGING & STORAGE
VpCI®-369 is available in 5 gallon (19 L) pails, 55 gallon (208 L) metal drums, liquid totes, and bulk.
VpCI®-369 is also available in 11 oz. (312 g) aerosol cans.
To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 °F (4-38 °C).
Shelf life: 2 years
CHARACTERISTICS/TECHNICAL DATA
|
Volume Solids |
99.20% |
|
Gloss (ASTM D532) |
NA |
|
VOCs (ASTM D3960) |
0.21 lb/gal (25 g/L) |
|
Viscosity |
10,000-45,000 cPs @ 77 °F (25 °C), 50-70 sec #3 Zahn Cup #3, 6000 cPs @ 104 °F (40 °C) |
|
Pencil Hardness (ASTM D3363) |
NA |
|
Spreading Rate |
1588 sq.ft/gal @ 1.0 mils DFT (38.9 sq.m/L @ 25 μm) |
|
Weight per Gallon |
7.5-8.4 lbs/gal (0.9-1kg/L) |
|
Flash Point |
248 °F (120 °C) |
|
Recommended DFT |
1.0-3.0 mils (25-75 μm) |
|
Recommended WFT |
1.0-3.0 mils (25-75 μm) |
|
Dry to Touch |
NA |
|
Dry to Handle |
NA |
|
Recoat Time |
NA |
|
Force Dry |
NA |
|
Full Cure |
NA |
|
Salt Spray (ASTM B117) |
500 hrs |
|
Humidity (ASTM D1748) |
4000 hrs |
|
Adhesion (ASTM D3359) |
NA |
|
Flexibility (ASTM D522) |
?" mandrel (1.27 cm) |
APPLICATION
Surface Preparation
Substrate should be free of grease, oil, dirt, fingerprints, drawing compounds, rust inhibitors (except Cortec® ap- proved), or any other surface contamination that could affect adhesion. Cortec® recommends a minimum of a SSPC-SP1 over painted surfaces. For bare metal applications, Cortec® recommends a NACE #3/SSPC-SP6. Consult Cortec® Tech- nical Service and/or test system adhesion prior to full scale application.
Power agitate to a uniform consistency using a “squirrel cage” type mixer, hand-held drill mixer, or other equivalent meth- od. VpCI®-369 can be applied by spray, roll, brush, or dip.
Typical Equipment Setups
HVLP / Conventional Spray
?Tip 0.02”-0.11” (0.5-2.8 mm) dependent upon pressures and viscosity
?Air Pressure 45-55 psi
?Fluid Pressure 10 psi
?Fluid hose should be ?” (0.95 cm) I.D. with a maximum length of 50 feet (15.2 m). ?” (0.64 cm) I.D. fluid hose can be used, but pressures may need to be adjusted. Pot should always have dual regulation and be kept at same elevation as spray gun.
Air Assisted Airless / Airless
?Tip 0.015”-0.035” (0.38-0.89 mm) dependent upon pres- sures and viscosity
?Pressure 1800-2500 psi
?Hose should be ?” (0.95 cm) I.D. minimum, but a ?” (0.64 cm) I.D. whip end section may be used for ease of applica- tion. A maximum length of 100 feet (30.5 m) is suggested.
Cleanup
Clean tools/equipment immediately after use with Butyl Acetate when coating is still wet. For removal of VpCI®-369 applied to a metal surface, use a VpCI®-41x Series alkaline cleaner/degreaser. Follow mfg’s safety recommendations when using any solvent.
Qingdao Cortec Rust Proof Materials Co., Ltd.,
Consultation hotline：0532-80989502
Sales Hotline：135-0535-2885
E-mail：zzgvci@163.com
QQ：592192408
Address：Room 2073, No. 12, chongmingdao East Road, Qingdao Economic Development Zone
Alibaba store：https://shop1420649126784.1688.com
Qingdao Cortec Rust Proof Materials Co., Ltd., the General Agent in China authorized by CORTEC Mobile phone：13505352885 Telephone：0532-80989502 Website：greattone.com.cn Mailbox：zzgvci@163.com Alibaba shop link click on the entrance Address：Room 2073, No. 12, chongmingdao East Road, Qingdao Economic Development Zone