Service Hotline
135-0535-2885
市 場 價:¥0
優(yōu) 惠 價:¥1
庫 存:0
PRODUCT DESCRIPTION:
VpCI®-337 is a ready-to-use waterborne corrosion inhibitor used primarily for robust preservation of internal void spaces. Vapor phase Corrosion Inhibitors (VpCI®) in VpCI®-337 migrate to protect metal surfaces resulting in time and cost savings.
When combined with labor-saving techniques, minimum amount of product can be used to protect large areas or volumes. VpCI-337 is effective on multiple metals.
VpCI®-337 is a combination of contact and vapor corrosion inhibitors, which allows a wide range of uses; from low-dose void- space protection to steel coil edge spray.
Pipes, tanks, and other equipment protected by VpCI®-337 are ready-for-use or commissioning, often without the need for removal*. VpCI®-337 is completely water-soluble allowing ease of use for pigging, purging, or other existing processes. No degreasing or stripping is necessary. The metal will retain a clean and rust-free surface. In most cases, the thin protective film will not affect paint processes, conductivity, appearance, or any other important property of metals or alloys.
VpCI®-337 Winterized has a lower freezing point for the convenience of application and storage in cold temperatures.
VpCI®-337 GE is specially formulated to be used in systems that are sensitive to sodium and sulfer.
*Please review your application with Cortec® Technical Service prior to commissioning.
FEATURES
?Biodegradable (87% biodegradation in 28 days)*
?Contains vapor and contact corrosion inhibitors which provide multi-metal corrosion protection
?Leaves a thin, self-healing film
?Ready-to-use
?Protection is immediate, convenient to apply, and easy to remove if required
*Biodegradability applies to VpCI®-337 only
TYPICAL APPLICATION
?Pipe, spool, modules
?Void space protection
?Edge spray for coils
?Double wall spaces
?Complex internal cavities
?Deep storage of key assets
METALS PROTECTED
?Hot/cold-rolled steel
?Silicon steel
?Stainless steel
?Cast iron
?Zinc
?Aluminum
?Copper
?Brass
TYPICAL PROPERTIES
VpCI®-337/VpCI®-337 GE
Appearance Clear to hazy amber liquid
Carrier Water
Film Type Thin, soft film
Flash Point >200 °F (93 °C)
Freeze Point 32 °F (0 °C)
pH 7.2-9.0 (neat)
Weight per Gallon 8.7-8.9 lb/gal (1.04-1.06 kg/l)
VpCI®-337 Winterized
Appearance Clear amber liquid
Carrier Water + Propylene Glycol
Freeze Point -47.2 °F (-44 °C)
pH 7.0-8.6 (neat)
Weight per Gallon 8.8-9.2 lb/gal (1.05-1.10 kg/l)
Note: Product may become hazy after a few days.
APPLICATION
Mix thoroughly prior to application.
Fog or mist into containers, boxes, crates, and shrouded packages at a rate of 0.5-1.0 oz./ft3 (0.5-1.0 L/m3 ) of enclosed space. Always spray VpCI®-337 uniformly within enclosure and allow direct access of vapors to metal surfaces to be protected.
Please contact Cortec® Technical Service for specific dosing and equipment recommendations, and for application guidance.
PACKAGING AND STORAGE
VpCI®-337 and VpCI®-337 GE are packaged in 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, totes, and bulk.
Minimum storage temperature: 40 °F (4 °C) Maximum storage temperature: 120 °F (49 °C)
VpCI®-337 Winterized is packaged in 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, totes, and bulk.
Minimum storage temperature: -40 °F (-40 °C) Maximum storage temperature: 120 °F (49 °C)
Shelf life: 24 Months
Qingdao Cortec Rust Proof Materials Co., Ltd.,
Consultation hotline:0532-80989502
Sales Hotline:135-0535-2885
E-mail:zzgvci@163.com
QQ:592192408
Address:Room 2073, No. 12, chongmingdao East Road, Qingdao Economic Development Zone
Alibaba store:https://shop1420649126784.1688.com