国产三级不卡在线电影gnmav_日韩乱偷中文字幕_在线免费看成人大片_日韩美中文字幕一二三区_惠民福利亚洲欧美日韩国产一区二区_在线免费观看国产黄色_少妇内射自拍视频在线观看_91精品久久久国产_成人免费看一级片_草莓视频免费下载直播app

Commercial equivalent to MIL– PRF – 16173E (Grades 1 & 2); NATO  6850-66-132-5848, 6099;NSN 8030-00-062-6950, 231-2345, 244-1300, 470-2601.

PACKAGING & STORAGE
VpCI®-368 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) metal drums, liquid totes, and bulk.
To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 °F (4-38 °C).
Shelf life: 2 years

CHARACTERISTICS/TECHNICAL DATA

Volume Solids	52.30%
Gloss (ASTM D532)	NA
VOCs (ASTM D3960)	2.9 lbs/gal (347 g/L)
Viscosity	60-70 sec+ Zahn#3
Pencil Hardness (ASTM D3363)	NA
Spreading Rate	838 sq.ft./gal @ 1.0 mils DFT (20.5 sq.m/L @ 25 μm)
Weight per Gallon	7.63 lbs/gal (0.91 kg/L)
Flash Point	158 °F (70 °C)
Recommended DFT	2.0-3.0 mils (50-75 μm)
Recommended WFT	4.0-6.0 mils (100-150 μm)
Dry to Touch	30 min
Dry to Handle	60 min
Recoat Time	NA
Force Dry	15-20 min @ 150 °F (65 °C)
Full Cure	3-7 days
Salt Spray (ASTM B117)	1500 hrs
Humidity (ASTM D1748)	2500 hrs
Adhesion (ASTM D3359)	NA
Flexibility (ASTM D522)	?" mandrel (1.27 cm)

APPLICATION
Surface Preparation
Substrate should be free of grease, oil, dirt, fingerprints, drawing compounds, rust inhibitors (except Cortec® ap- proved), or any other surface contamination that could affect adhesion. Cortec® recommends a minimum of a SSPC-SP1 over painted surfaces. For bare metal applications, Cortec® recommends a NACE #3/ SSPC-SP6. Consult Cortec® Tech- nical Service and/or test system adhesion prior to full scale application.

Power agitate to a uniform consistency using a “squirrel cage” type mixer, hand-held drill mixer, or other equivalent meth- od. VpCI®-368 can be applied by spray, roll, brush, or dip.

Typical Equipment Setups

HVLP / Conventional Spray
?Tip 0.02”-0.11” (0.5-2.8 mm)* dependent upon pressures and viscosity
?Air Pressure 45-55 psi
?Fluid Pressure 10 psi
?Fluid hose should be ?” (0.95 cm) I.D. with a maximum length of 50 feet (15.2 m). ?” (0.64 cm) I.D. fluid hose can be used but pressures may need to be adjusted. Pot should always have dual regulation and be kept at same elevation as spray gun.

Air Assisted Airless / Airless
?Tip 0.015”-0.035” (0.38-0.89 mm)* dependent upon pres- sures and viscosity
?Pressure 1800-2500 psi
?Hose should be ?” (0.95 cm) I.D. minimum, but a ?” (0.64 cm) I.D. whip end section may be used for ease of applica- tion. A maximum length of 100 feet (30.5 m) is suggested.

*All tests performed after a 7 day cure at ambient temperature

Cleanup
Clean tools/equipment immediately after use with butyl acetate when coating is still wet. When dry, use butyl cellu- solve or MEK. Follow mfg’s safety recommendations when using any solvent.